Nisbau Twin Shaft Mixer Series Euromix with standard pneumatic discharge door, vibrated concrete output 1,3 m3, equipped with the following accessories:
-Water distributor/ water spraying ring round the chute;
-Safety switch of the maintenance door;
-Service platform and railing;
-Cabling and Wiring of Motors and Auxiliary Devices (Limit Switches)to a IP55 Junction Box installed on the Mixer
-Bottom Liner Plates in Anti-Wear NI-HARD Cast Iron Tiles, thickness 10 mm, min. hardness 500HB;
-Side Walls Liner Plates in Anti-Wear NI-HARD Cast Iron Tiles, thickness 10 mm, min. hardness 500HB
-Ten (10) mixing arms in Spheroidal Graphite Cast Iron, bolted to the shafts
-Mixing Blades in NI-HARD Cast Iron, min. hardness 500 HB
-Scraping Blades in NI-HARD Cast Iron, min. hardness 600 HB
-Automatic Lubrication System with liquid grease for the mixing shafts\' seals, with electrical pump and sequential distributor
-All moving parts of the gearboxes and bearings are permanently lubricated by oil bath
-Cover with one inspection hatches and one wide access open able door, protected by a key transfer lock, supplied with the related lock to be installed on the Mains
-Switchgear of the Plant, compliant with the CE regulations
-One pneumatically operated Discharge Door, with three limit switches (Open, Half-Open, Close);
-Mixing Motors with operating temperature within class B, with insulating materials class H, Protection Degree IP55, Tropicalised, European Voltage 400V/50HZ
-Final Painting: RAL must be given by order from customer; Otherwise RAL 7035
=============================================
You can contact with our office for more information and technical details.
Attrezzature per magazzino
